|
|
|
Address
|
Fabian Kempter
Institute of Engineering and Computational Mechanics
University of Stuttgart
Pfaffenwaldring 9
70569 Stuttgart, Germany
|
Office
|
Pfaffenwaldring 9, 3rd Floor
Room 3.103
|
Phone
Fax
|
+49 711 685-66201
+49 711 685-66400
|
Email
|
fabian.kempter@itm.uni-stuttgart.de(Public PGP-Key)
|
Field of Research
Numerical and Experimental Validation of Muscle Actuated Human Body Models for Driving Safety
Publications
black: published,
green: accepted for publication,
orange: submitted for publication
-
Kempter, F.; Labanti, F.; Fehr, J.:
Analysis of the Behavior of an Active Human Body Model Exposed to Kinematics of a Driver-in-the-Loop Simulator Experiment.
Proceedings of IRCOBI Conference, Florence, 2019. (2 pages)
-
Kempter, F.; Fehr, J.; Stutzig, N.; Siebert, T.:
On the Validation of Human Body Models with a Driver-in-the-Loop Simulator.
Proceedings in Joint International Conference on Multibody System Dynamics - IMSD, Lissabon, 2018. (16 pages)
-
Martynenko, O.; Kempter, F.; Kleinbach, C.; Schmitt, S.; Fehr, J.:
Integrated Physiologically Motivated Controller for the Open-Source Extended Hill-type Muscle Model in LS-DYNA.
Proceedings of IRCOBI Conference, Athens, 2018. (2 pages)
-
Kempter, F.; Fehr, J.:
Layout of a Driver-in-the-Loop Simulator for Validation of Human Body Models.
Proceedings in Applied Mathematics and Mechanics, Munich, 2018. (2 pages)
-
Martynenko, O.; Kempter, F.; Kleinbach, C.; Schmitt, S.; Fehr, J.:
Development of an internal physiological muscle controller within an open-source Hill-type material model in LS-DYNA.
Proceedings in Applied Mathematics and Mechanics, Munich, 2018. (2 pages)
-
Kempter, F.; Fehr, J.:
Validation of Active Human Body Models with a Driver-in-the-Loop Simulator.
GMA Fachausschuss 1.30: "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik", Anif/Salzburg, 2017. (2 pages)
-
Fehr, J.; Kempter, F.; Kleinbach, C.; Schmitt, S.:
Guiding Strategy for an Open Source Hill-type Muscle Model in LS-Dyna and Implementation in the Upper Extremity of a HBM.
Proceedings of IRCOBI Conference, Antwerp, Belgium, 2017. (2 pages)
-
Kempter, F.:
Untersuchung der Möglichkeiten zur Muskelumlenkung in LS-Dyna und Anwendung in einem Armmodell, Masterarbeit MSC-248.
Institut für Technische und Numerische Mechanik, Universität Stuttgart, 2017.
Poster sessions
-
December 12-14, 2018: Validation Experiments Using a Driver-in-the-Loop Simulator, SimTech Status Seminar, Bad Boll, Germany.
Supervised diploma and student theses
-
"Untersuchung des Einflusses von komfortablen Sitzpositionen auf die Insassensicherheit mittels Crashsimulation mit Menschmodellen", student thesis.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2019 (running).
-
"Simulation of Volunteer Tests Performed in a Driver-in-the-Loop Simulator for the Validation of Human Models", master thesis MSC-280.
Sapienza University of Rome, 2019.
-
"Markerbasierte Lokalisierung von Objekten mit einer Infrarotkamera und deren netzwerkbasierte Nutzung für Regelungsaufgaben", bachelor thesis BSC-96.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.
Supervision together with Henrik Ebel, M.Sc.
-
"Echtzeitfähige Simulationsmodelle des Menschen für die Pre-Crash Phase", bachelor thesis BSC-92.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.
Supervision together with Jun.-Prof, Dr.-Ing. Jörg Fehr
-
"Simulation und Analyse von Motorradunfällen mit Hilfe des Mehrkörpersimulationsprogramm MADYMO", bachelor thesis BSC-91.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.
Supervision together with Jun.-Prof, Dr.-Ing. Jörg Fehr
-
"Investigation of Occupant Response in Rear-End Crash Simulations with an Active Human
Body Model", master thesis MSC-276.
Sapienza University of Rome, 2018.
Supervision together with Dipl.-Ing. Christian Kleinbach
-
"Entwicklung eines Modells des menschlichen vestibulären Systems zur Gütebewertung von Motion Cueing Algorithmen", bachelor thesis BSC-87.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.
-
"Automatisierte Rekonstruktion der Fahrerkinematik in einem Driver-in-the-Loop Prüfstand mittels eines Motion Capture Systems", bachelor thesis BSC-87.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2018.
-
"Entwicklung eines automatisierten Ablaufs zur Simulation von Insassenbewegungen in Pre-Crash Szenarien mit MADYMO", bachelor thesis BSC-74.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2017.
-
"Modellierung von Pre-Crash Fahrszenarien auf einem Driver-in-the-Loop Prüfstand", bachelor thesis BSC-71.
University of Stuttgart, Institute of Engineering and Computational Mechanics, 2017.
Talks
-
October 19, 2018: Symposium on Human Modeling and Simulation in Automotive Engineering, carhs Berlin, "Academic Scale Driver-in-the-Loop Simulator for the Validation of Human Body Models in Multidirectional Driving Scenarios"
-
May 30, 2018: Statusseminar ITM, Bad Herrenalb, "Drivers’ Behavior inside a Driver-in-the-Loop Simulator - What's Next?"
-
March 21, 2018: GAMM Annual Meeting, Munich, "Layout of a Driver-in-the-Loop Simulator for Validation of Human Body Models"
-
September 21, 2017: GMA-Fachausschuss 1.30 - "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik", Anif/Salzburg, "Validation of Active Human Body Models with a Driver-in-the-Loop Simulator"
-
May 23, 2017: Statusseminar ITM, Monbachtal, "Investigation of Driver Behavior in Pre-Crash Scenarios for Validation of Active Human Body Models"
Teaching
|
|