|
|
Dr.-Ing. Florian Fleißner (2004-2018)
New
|
|
Research Interests
Doctoral Thesis
Fleissner, F.:
Parallel Object Oriented Simulation with Lagrangian Particle Methods,
Schriften aus dem Institut für Technische und Numerische Mechanik der
Universität Stuttgart, Band 16. Aachen: Shaker Verlag, 2010.
Publications
published,
accepted for publication,
submitted for publication
-
Gnanasambandham, C.; Fleissner, F.; Eberhard, P.:
Enhancing the Dissipative Properties of Particle Dampers using Rigid Obstacle-Grids
Journal of Sound And Vibration, 115522, Vol. 484, 2020.
[https://doi.org/10.1016/j.jsv.2020.115522]
[free access link (valid until August 16, 2020)]
-
Stühler, S.; Fleissner, F.; Eberhard, P.:
A contact detection algorithm for deformable tetrahedral geometries based on
a novel approach for general simplices used in the discrete element method
Computational Particle Mechanics, pp. 1-13, 2016.
[http://dx.doi.org/10.1007/s40571-016-0147-y]
-
Eberhard, P.; Seifried, R.; Ergenzinger, C.; Stühler, S.; Spreng, F.;
Beck, F.; Mueller, A.; Fleissner, F.:
Particles - Bridging the Gap between
Solids and Fluids.
Procedia IUTAM, Bd. 10, S. 161-179, 2014.
[http://dx.doi.org/10.1016/j.piutam.2014.01.016]
-
Beck,F.; Fleissner,F.; Eberhard,P.:
Lagrangian Simulation of a Fluid with
Solid
Particle Loading Performed on Supercomputers.
In: High Performance Computing in Science and Engineering 13, 2013, pp.405-421
-
Beck,F.; Fleissner,F.; Eberhard,P.:
A Fully Lagrangian Approach for
Modeling Abrasive Wear.
In: PARTICLE BASED METHODS III Fundamentals and Applications,
Proceedings Particles 2013 by M. Bischoff, E. Ramm, E. Oñate, R. Owen and P.
Wriggers (Eds.), Stuttgart 2013, ISBN: 978-84-941531-8-1
-
Beck,F.; Fleissner,F.; Eberhard,P.:
Simulation of a Pendulum with Fluid
Interaction and Experimental Validation.
In: Computational Methods in Marine
Engineering V, Proceedings Marine 2013 by Brinkmann, B. and Wriggers,P. (Eds.),
Hamburg 2013, ISBN: 978-84-941407-4-7
-
Spreng, F.; Eberhard, P.; Fleissner, F.:
An Approach for the Coupled
Simulation of Machining Processes Using Multibody System and Smoothed Particle
Hydrodynamics Algorithms.
Theoretical and Applied Mechanical Letters, Vol. 3, No. 1, pp. 013005-1-7, 2013.
[http://dx.doi.org/10.1063/2.1301305]
-
Stühler, S.; Fleissner, F; Seifried, R.; Eberhard, P.:
A
Discrete Element Approach for Wave Propagation in Thin Rods.
PAMM Proceedings in Applied Mathematics and Mechanics. Vol. 13, No. 1, pp.
31-32, 2013. [http://dx.doi.org/10.1002/pamm.201310011]
-
Spreng, F.; Eberhard, P.; Fleissner, F.:
An Approach for the Coupled Simulation
of Machining Processes Using Multibody System and Smoothed Particle
Hydrodynamics Algorithms.
In Proceedings of the 6th Asian Conference on Multibody Dynamics, Shanghai,
China, 26.-30. August, 2012.
-
Gaugele, T.; Eberhard, P.; Fleissner, F.:
Particle Methods to Model Ductile, Heat Conductive Material.
In: Applications and Perspectives of Multibody System Dynamics, Proceedings EUROMECH 515 by Zahariev, E. and
Ceccarelli, M. (Eds.), July 13-16, 2010, Blogoevgrad, Bulgaria. Red Hook:
Curran, 2011.
-
Dierichs, K.; Fleissner, F.; Menges, A.:
Interrelation of experiment and simulation in the development of
Aggregate Architectures,
Proceedings of the International Symposium on Algorithmic Design for
Architecture and Urban Design,
ALGODE TOKYO 2011
March 14-16, 2011, Tokyo, Japan
-
Lehnart, A.; Fleissner, F.; Eberhard, P.:
Simulating Tank Vehicles with Sloshing Liquid Load,
Simpack News, Vol. 9/2010, pp. 10-12, 2010
-
Fleissner, F.; Haag, T.; Hanss, M.; Eberhard. P.:
Analysis of Granular Chute Flow Based on a Particle Model Including
Uncertainties,
Proceedings of the 1st International Conference on Computational
Contact Mechanics (ECCOMAS), Lecce, Italy, 2009
-
Lehnart, A.; Fleissner, F.; Eberhard. P.:
An Alternative Approach to Modelling Complex Smoothed Particle
Hydrodynamics Boundaries,
Proceedings of the 5th International SPHERIC SPH Workshop,
Manchester, Great Britain, 2010
-
Lehnart, A.; Fleissner, F.; Eberhard. P.:
Simulating sloshing liquids in tank vehicles,
Proceedings of the 1st Commercial Vehicle Technology Symposium,
Kaiserslautern, Germany, 2010
-
Fleissner, F.; Haag, T.; Hanss, M.; Eberhard, P.:
Uncertainty Analysis for a Particle Model of Granular Chute Flow,
CMES, Computer Modelling in Engineering & Sciences, Vol. 52, No. 2, pp.
181-196,
2010
-
Eberhard, P.; Gaugele, T.; Fleissner, F.:
Particle Methods used to Model Cutting Processes Including Heat
Conduction,
Proceedings of the International Conference on Particle-Based
Methods, Fundamentals and Applications (Particles 2009), Barcelona, Spain, 2009
-
Schiehlen, W.; Fleissner, F.; D'Alessandro, V.; Eberhard,
P.:
Sloshing Cargo in Silo and Tank Trucks,
Proceedings of the International Symposium on Dynamics of Vehicles on
Roads and Tracks, Stockholm, Sweden, 2009
-
Fleissner, F.; Eberhard, P.:
A Co-Simulation Approach for the 3D Dynamic Simulation of Vehicles
Considering Sloshing in Cargo and Fuel Tanks,
Proceeding in Applied Mathematics and Mechanics, Volume 9, pp. 133-134,
2009
-
Fleissner, F., Lehnart, A., Eberhard, P.:
Dynamic Simulation of Sloshing Fluid and Granular Cargo in Transport Vehicles,
Vehicle System Dynamics, Vol. 48, No. 1, pp. 3-15, 2010
-
Lehnart, A.; Fleissner, F.; Eberhard P.:
Using SPH in a Co-Simulation Approach to Simulate Sloshing in Tank
Vehicles,
Proceedings of the 4th International SPHERIC Workshop, Nantes, France, pp.
241-246,
2009
-
Eberhard, P.; Gaugele, T; Fleissner F.:
Particle Methods Used to Model Cutting Processes Including Heat
Conduction,
Proceedings of the International Conference on Particle-Based Methods
Fundamentals and Applications (Particles 2009), pp. 142-145,
2009
-
Fleissner, F.; D'Alessandro V.; Schiehlen, W.; Eberhard, P.:
Sloshing Cargo in Silo Vehicles,
Journal of Mechanical Science and Technology, Vol. 23, No. 4, pp.
968-973, 2009.
-
Gaugele, T.; Fleissner, F.; Eberhard, P.:
Simulation of Material Tests using Meshfree Lagrangian Particle Methods,
Proceedings of the Institution of Mechanical Engineers, Part K: Journal
of Muli-body Dynamics, Vol. 222(K4), pp. 327-338, 2008
-
Fleissner, F.; D'Alessandro, V.; Schiehlen, W.; Eberhard, P.:
Sloshing Cargo in Tank Trucks and Silo Vehicles,
Proceedings of the 4th Asian Conference on Multibody Dynamics, Jeju,
Korea, 2008.
-
Fleissner, F.; Eberhard, P.:
Examples for Modelling, Simulation and Visualization with the Discrete
Element Method in Mechanical Engineering,
In: D. Talaba, A. Amditis:
Product Engineering: Tools and Methods based on Virtual Reality,
Springer, Dordrecht, pp. 419 - 426, 2008.
-
Fleissner, F.; Eberhard, P.:
Parallel load-balanced simulation for short-range interaction particle
methods with hierarchical particle grouping based on orthogonal
recursive bisection,
International Journal for Numerical Methods in Engineering, Vol. 74,
pp. 531-553, 2008
-
Alkhaldi, H.; Ergenzinger, C.; Fleissner, F.; Eberhard,
P.:
Comparison Between Two Different Mesh Descriptions Used for Simulations
of Sieving Processes,
Granular Matter, Vol. 10, No. 3,
pp. 223-229, 2008.
-
Fleissner, F.; Eberhard, P.:
Load Balanced Parallel Simulation of Particle-Fluid DEM-SPH Systems
with Moving Boundaries,
In: C. Bischof et al. (Eds.): Proceedings of
Parallel Computing (ParCo): Architectures, Algorithms and Applications,
Aachen/Jülich, 2007, IOS Press, Amsterdam, Vol. 38, pp. 37-44, 2007.
-
Fleissner, F.; Gaugele, T.; Eberhard, P.:
Applications of the Discrete Element Method in Mechanical
Engineering,
Multibody System Dynamics, Vol. 18, No. 1, pp. 81-94, 2007.
-
Fleissner, F.; Eberhard, P.:
Parallel Load Balanced Particle Simulation with Hierarchical Particle
Grouping Strateegies,
Proceedings of IUTAM 2006, Multiscale Problems in
Multibody System Contacts, pp. 33-44, 2006.
-
Fleissner, F.; Eberhard, P.:
Dynamical Particle Simulation with Parallel Cache-Aware Domain
Decomposition Strategies,
PAMM Proceedings in Applied Mathematics
and Mechanics, Vol. 5, No. 1, pp. 657-658, 2005.
-
Fleissner, F.:
Evaluation of Numerical Methods for the Integration of
Differential-Algebraic Systems in the Context of Mechanical Multibody
Systems,
Diplomathesis,
University of Erlangen,
Insitute of
Applied Mechanics, 2003.
-
Fleissner, F.:
Optimization of Multigrid Components for High-Performance
Architectures,
Studienarbeit,
Universität Erlangen, Department of Computer
Science 10 (System Simulation), 2003.
-
Fleissner, F.:
Implementation of the Return-Mapping-Algorithm CPP for General
Hardening into the FE-System MSC.Marc,
Student research project,
University of Erlangen,
Institute of
Applied Mechanics, 2002.
Talks
Oktober 11, 2016:
Smoothed Particle Hydrodynamics - An Introduction,
CECAM Workshop on Particle-based Simulations for Hard and Soft
Matter,
Stuttgart, Germany
-
Oktober 10, 2016:
Pasimodo - A Particle Simulation Platform,
CECAM Workshop on Particle-based Simulations for Hard and Soft
Matter,
Stuttgart, Germany
-
Oktober 9, 2014:
Smoothed Particle Hydrodynamics - An Introduction,
CECAM Workshop on Particle-based Simulations for Hard and Soft
Matter,
Stuttgart, Germany
-
Oktober 9, 2014:
Pasimodo - A Particle Simulation Platform,
CECAM Workshop on Particle-based Simulations for Hard and Soft
Matter,
Stuttgart, Germany
-
October 26, 2011:
Coupled Multibody-Particle Simulations - An Integral Approach,
International Conference on Particle-Based Methods II (ECCOMAS
Particles 2011), Barcelona, Spain
-
October 13, 2011:
Applications of Particle based Methods at the ITM of the University of
Stuttgart,
DLR, Munich
-
September 19, 2010:
Parallel Object Oriented Simulation with Lagrangian Particle Methods,
Fraunhofer IWTM, Kaiserslautern
-
March 25, 2010:
An Approach to Parallel Particle Simulation with Short Ranged
Interactions on Multicore Architectures,
81st Annual Meeting GAMM 2010, Karlsruhe, Germany
-
March 23, 2010:
Metal Cutting Simulation Described by Particle Methods Including Heat
Conduction,
81st Annual Meeting GAMM 2010, Karlsruhe, Germany
-
December 16, 2009:
Particles - Simulation of Discrete and Continuous Problems,
Seminar of the Institute of Laser Tools, University of Stuttgart, Stuttgart
-
December 11, 2009:
Parallel Object Oriented Simulation with Lagrangian Particle Methods,
Presentation as part of the PhD defense, University of Stuttgart, Stuttgart
-
December 1, 2009:
Hybride Smoothed Particle Hydrodynamics Methods,
Seminar zur Physik der kondensierten Materie, Institute for Theoretical and
Applied Physics, University of Stuttgart, Stuttgart
-
November 26, 2009:
Particle Methods used to Model Cutting Processes Including Heat Conduction,
International Conference on Particle-Based Methods (Particles 2009),
Barcelona, Spain
-
September 18, 2009:
A Fuzzy Arithmetical Sensitivity Analysis of a Chute Flow Particle
Simulation,
ECCOMAS 1st International Conference on Computational Contact
Mechanics, Lecce, Italien
-
July 8, 2009:
Fuzzy Analysis of Particle Chute Flows,
Statusseminar 2009, Institute of Engineering and Computational Mechanics,
Hohenwart
-
June 24, 2009:
Applications of Lagrangian Particle Methods in Mechanical
Engineering,
EU-Project NEED, University of Split, Split, Croatia
-
February 11, 2009:
A Co-Simulation Approach for the 3D Dynamic Simulation of Vehicles
Considering Sloshing in Cargo and Fuel Tanks,
80th Annual Meeting of the International Association of Applied
Mathematics and Mechanics, Gdansk, Poland
-
August 22, 2008:
A Biomechanics Approach for Prosthesis Design,
Authors: W. Schiehlen und M. Ackermann,
4th Asian Conference on Multibody Dynamics 2008, Seogwipo, Korea
-
August 22, 2008:
Sloshing Cargo in Tank Trucks and Silo Vehicles,
4th Asian Conference on Multibody Dynamics 2008, Seogwipo, Korea
-
July 9, 2008:
Retrospect and Foresight on Future Projects,
Statusseminar 2008, Institute of Engineering and Computational Mechanics,
Hohenwart
-
Mai 30, 2008:
Applications of Lagrangian Particle Methods,
Colloquium in honor of the 70th anniversary of the birthday of Werner Schiehlen,
University of Stuttgart, Stuttgart
-
September 4, 2007:
Load Balanced Parallel Simulation of Particle-Fluid DEM-SPH
Systems with Moving Boundaries,
Parallel Computing '07, Research Center Jülich, Jülich
-
July 12, 2007:
Examples for the Application of the Discrete Element Method to Engineering Problems,
Seminar of the SFB 716, University of Stuttgart, Stuttgart
-
July 8, 2009:
Fuzzy Analysis of Particle Chute Flows,
Statusseminar 2009, Institute of Engineering and Computational Mechanics,
Hohenwart
-
June 1, 2007:
Examples for Modelling and Simulation with the Discrete Element Method in
Mechanical Engineering,
2nd Advanced Study Institute, Chania, Crete
-
May 9, 2007:
News from Pasimodo,
Statusseminar 2007, Institute of Engineering and Computational
Mechanics, Rossberghaus, Reutlingen
-
September 29, 2006:
Parallel Particle Simulation with Moving Boundary Geometries,
Dynamiktag 2006, Institute of Engineering and Computational Mechanics,
University of Stuttgart, Stuttgart
-
Juli 5, 2006:
Crumbs 'n Surf,
Statusseminar 2006, Institute of Engineering and Computational
Mechanics, Rossberghaus, Reutlingen
-
April 14, 2006:
Parallel Simulation of Disperse Granular Media,
Institute Polytechnique Privé de
Casablanca, Morocco
-
February 21, 2006:
Parallel load balanced particle simulations with hierarchical particle
grouping strategies,
IUTAM Symposium on Multiscale Problems in Multibody System
Contacts, University of Stuttgart, Stuttgart
-
June 9, 2005:
Dynamical Particle Simulation with Parallel Cache-Aware Domain Decomposition
Strategies,
Statusseminar 2005, Institute B of Mechanics, Rossberghaus, Reutlingen
-
March 30, 2005:
Dynamical Particle Simulation with Parallel Cache-Aware Domain Decomposition
Strategies,
GAMM 2005, Université de Luxembourg, Luxembourg
-
April 8, 2004:
Application of Different DAE Solvers to Flexible Multibody Systems with Large
Deformations,
Statusseminar 2004, Institute B of Mechanics, Burg Teck, Owen
-
March 3, 2004:
Application of Different DAE Solvers to Flexible Multibody Systems with
Large Deformations,
EUROMECH 452, Martin-Luther-University, Halle-Wittenberg, Halle
-
September 26, 2003:
Multibody Systems with Closed Kinematic Loops - Numerical Treatment of
Systems of Differential-Algebraic Equations,
Summer Academy 2003: Mechanics - Modelling, Simulation and
Optimization, Sarntal, Italy
-
September 25, 2001:
Turbulence and Turbulence Modelling,
Summer Academy 2001: Numerical
Simulation in Material Science and Chemical Engineering, Sarntal, Italy
Poster-Presentations
-
Juli, 4.-6. 2007:
Pure Lagrangian Particle-Fluid Simulation in Domains with Dynamically
Moving Boundaries,
Statics and Dynamics of
Granular Media and Colloidal Suspensions, Sattelite Conference of StatPhys
23,
Naples, Italy
-
4.-5. September 2006:
Parallel Simulation of Polydisperse Particle Systems in Moving Vessels
with Fluids,
Appraisal of SFB-716, Stuttgart, "Dynamic Simulation of Systems with Large
Numbers of Particles",
F. Fleissner, P. Eberhard, J. Harting.
-
June, 19.-23. 2006:
Parallel Load Balanced Particle Simulation,
Dygram 2006,
Rennes, France
Supervised Thesis
in progress, completed
- Stühler, Sven:
An Application of a Discrete Element Based Approach for Modelling
Hyperelastic Materials,
diploma thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2012
-
Spreng, Fabian:
Validation of the existing SPH-model for elastic and brittle solids,
diploma thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2011
-
Beck, Florian:
Validation of the SPH-Modell implemented in Pasimodo,
diploma thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2011
-
Beck, Benjamin:
Implementation and test of a multibody system simulation module for the
particle simulation software Pasimodo,
students thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2010
-
Volzer, Thomas:
Implementationn and testing of an iterative contact detection algorithm for
thetrahedral particles,
students thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2010
-
Beck, Florian:
Implementation of periodic boundary conditions in Pasimodo,
students thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2010
-
Nägele, Frank:
Choice and integration of a library for the detection of collisions between polyhedra
for the particle simulation program Pasimodo,
students thesis, University of Stuttgart, Institute of Engineering and
Computational Mechanics, 2009
-
D'Alessandro, Vincenzo:
Dynamic simulation of sloshing fluids in tank trucks,
master thesis,
University of
Stuttgart, Institute of Engineering and Computational Mechanics, 2007
-
Ergenzinger, Christian:
Experimental investigations of the dynamics of the sieving process in a
tumble-screening machine,
diploma thesis,
University of
Stuttgart, Institute of Engineering and Computational Mechanics, 2007
-
Lehnart, Alexandra:
A Smoothed Particle Hydrodynamics Approach for Treating the Euler-Equations, diploma thesis,
University of
Stuttgart, Institute of Engineering and Computational Mechanics, 2006/07
-
Seybold, Florian:
Implementation of a Numerical Integrator for the Euler Equations with a
Description of the Rotations by Quaternions, students thesis,
University of
Stuttgart, Institute of Engineering and Computational Mechanics, 2005/06
-
Krüger, Gudrun:
Implementation and Validation of Various Force-Laws in Terms of C++ Classes
for Integration into a Particle Simulation Program, master Thesis, University of Stuttgart, Institute B of Mechanics, 2005
Teaching
Additional Services at the Institute
-
developer of the particle simulation software Pasimodo
|
|