|
|
Dr.-Ing. Philip Holzwarth (2011 - 2016)
|
|
Email
|
|
Field of Research
Publications
black: published, green: accepted for publication, red: submitted for publication
-
Holzwarth, P.:
Modellordnungsreduktion für substrukturierte mechanische Systeme
Dissertation, ISBN: 978-3-8440-5234-3.
-
Holzwarth, P.; Eberhard, P.:
Interface Reduction of Substructured Mechanical Systems.
Proceedings Int. Conference on Multibody System Dynamics (IMSD 2016), Montreal, Canada, 2016 (14 pages).
-
Fehr, J.; Holzwarth, P.; Eberhard, P.:
Interface and Model Reduction for Efficient Simulations of Nonlinear Vehicle Crash Models.
Mathematical and Computer Modelling of Dynamical Systems, 2015.
-
Holzwarth, P.; Eberhard, P:
Interpolation and Truncation Model Reduction Techniques in Coupled Elastic Multibody Systems.
ECCOMAS Thematic Conference on Multibody Dynamics, 2015.
Abstract
-
Schurr, D.; Holzwarth, P.; Ziegler, P.; Eberhard, P;:
Computational Vibration Analysis of Elastic Gears in Vehicles Using Different Reduction Methods and Nodal Contact Calculation.
22nd International Congress on Sound and Vibration, 2015.
-
Eberhard, P.; Holzwarth, P.:
Coupling Elastic Bodies with an Enhanced Craig-Bampton-like Scheme.
86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 2015.
-
Holzwarth, P.; Eberhard, P.:
Interface Reduction for CMS Methods and Alternative Model Order Reduction.
Proceedings of MATHMOD 2015 - 8th Vienna International Conference on Mathematical Modelling, 2015.
-
Holzwarth, P.; Eberhard, P.:
Input-Output Based Model Reduction For Interconnected Systems.
Proceedings of the 5th European Conference of Computational Mechanics (ECCM V), 2014.
-
Holzwarth, P.; Eberhard, P:
SVD-Based Improvements for Component Mode Synthesis in Elastic Multibody Systems.
European Journal of Mechanics - A/Solids, 2014.
-
Burkhardt, M.; Holzwarth, P.; Seifried, R.:
Inversion Based Trajectory Tracking Control for a Parallel Kinematic Manipulator with Flexible Links.
Proceedings of the 11th International Conference on Vibration Problems.
Z. Dimitrovova et.al. (eds.), Lisbon, Portugal, September 9-12, 2013, (10 pages).
-
Holzwarth, Philip; Fischer, Michael; Eberhard, Peter:
Advanced Model Reduction - Improving Dynamic Simulations with Large FE-Models.
13th Stuttgart International Symposium "Automotive and Engine Technology", Stuttgart, 2013.
-
Holzwarth, Philip:
Bewertung alternativer Reduktionsverfahren im FE- und MKS-Umfeld.
Diplomarbeit DIPL-173. Stuttgart: Universität, Institute of Engineering and Computational Mechanics, 2011.
-
Holzwarth, Philip:
Nonlinear Model Predictive Control for Time-delay Systems.
Studienarbeit IST-125. Stuttgart: Universität, Institute for
Systems Theory and Automatic Control, 2010.
-
Holzwarth, Philip:
Laguerre basierte Reduktionsverfahren für Systeme zweiter Ordnung.
Studienarbeit STUD-325. Stuttgart: Universität, Institute of Engineering and Computational Mechanics, 2010.
Talks
-
July 12th, 2016:
Lecture "Model Reduction of Mechanical Systems", Stuttgart,
"Interface Reduction of Substructured Mechanical Systems"
-
June 29th 2016:
Statusseminar Institut für Technische und Numerische Mechanik, Monbachtal Bad Liebenzell,
"Interface Reduction of Substructured Mechanical Systems - oder etwas mehr...? - oder etwas weniger...?"
-
May 30th, 2016:
International Conference on Multibody System Dynamics (IMSD 2016), Montreal,
"Interface Reduction of Substructured Mechanical Systems"
-
November 27th, 2015:
SimTech Statusseminar 2015, Bad Boll,
"Do separately reduced subsystems yield an optimally described global behaviour?"
-
January 19th, 2016:
FVA Arbeitsgruppensitzung "Berechnung und Simulation", Stuttgart,
"Alternative Modellreduktion in substrukturierten Systemen"
-
June 29th, 2015:
ECCOMAS Multibody Dynamics 2015, Barcelona,
"Interpolation- and Truncation-Based Model Reduction Techniques in Coupled Elastic Multibody Systems"
-
June 17th, 2015:
Statusseminar Institut für Technische und Numerische Mechanik, Monbachtal Bad Liebenzell,
"MOR WARS IV - A New Hope"
-
February 18th, 2015:
MATHMOD 2015 - 8th Vienna International Conference on Mathematical Modelling, Vienna
"Interface Reduction for CMS Methods and Alternative Model Order Reduction"
-
July 22nd, 2014:
11th. World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain,
"Input-Output Based Model Reduction for Interconnected Systems"
-
June 25th, 2014:
Statusseminar Institut für Technische und Numerische Mechanik, Monbachtal Bad Liebenzell,
"Neues von moreMBS und le morembs und MatMorembs"
-
September 20th, 2013:
GMA-Fachausschuss 1.30, "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik", Salzburg,
"Boundary Conditions on Elastic Multibody Systems and Implications for Model Order Reduction"
-
June 12th, 2013,
Statusseminar des Instituts, Bad Liebenzell,
"Welche Vorteile bringt uns die 'moderne' Modellreduktion? Und schauen wir auf die richtigen Größen?"
-
April 23rd, 2013:
2013 European Altair Technology Conference, Turin, Italy,
"Alternative Model Order Reduction in Elastic Multibody Systems"
-
February 26th, 2013:
13th Stuttgart International Symposium "Automotive and Engine Technology", Stuttgart,
"Advanced Model Reduction - Improving Dynamic Simulations with Large FE-Models"
-
September 21st, 2012:
GMA-Fachausschuss 1.30, "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik", Salzburg,
"Model Reduction of Coupled Components in Elastic Multibody Systems"
-
July 12th, 2012,
Sino-German PhD-Student Workshop, Shanghai Jiao Tong University
"Model Order Reduction in Elastic Multibody Systems"
-
June 12th, 2012,
Statusseminar des Instituts, Bad Liebenzell,
"Teil 1 - Tiefere Einblicke in die Modellreduktion und EMKS" (in German)
-
May 22nd, 2012,
Simtech PN 6 Seminar, Uni Stuttgart
"Bewertung alternativer Reduktionsverfahren im FE- und MKS-Umfeld" (in German)
Posters
-
November 25th, 2015: SimTech Statusseminar 2015, Bad Boll,
"Model Order Reduction for Coupled Bodies in Elastic Multibody Systems"
-
October 14th, 2015: Model Reduction of Parametrized Systems MoRePaS III, Triest, Italien,
"Model Reduction of a Nonlinear Crash Model of a Racing Kart"
presented by Jun.-Prof. Dr.-Ing. Jörg Fehr
-
December 10th, 2014: SimTech Statusseminar 2014, Bad Boll,
"Model Order Reduction for Coupled Bodies in Elastic Multibody Systems"
-
October, 2nd-5th 2012: Model Reduction of Parametrized Systems MoRePaS II, Günzburg,
"Model Order Reduction for Coupled Bodies in Elastic Multibody Systems"
Supervised Student- and Diplomathesis
-
Kazaz, L.:
Formulierung elastischer Mehrkörpersysteme mit bewegtem Referenzsystem und Durchgriffstermen, Forschungsmodul (Simtech). Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2015.
In co-supervision with Dr.-Ing. Pascal Ziegler, Dipl.-Ing. Nico Walz and Dipl.-Ing. Michael Baumann
-
Trautwein, F.:
Modellreduktion von elastischen Spiegelsystemen unter Berücksichtigung von optischen Sensitivitäten, Studienarbeit. Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2015.
In co-supervision with Dipl.-Ing. Johannes Störkle
-
Walker, N.:
Methoden zur Interface-Reduktion bei gekoppelten Systemen, Masterarbeit. Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2015.
-
Brauchler, A.:
Einfluss der Markov-Parameter bei der Simulation von Stoßvorgängen, Bachelorarbeit. Universität Stuttgart, Institut für
Technische und Numerische Mechanik.
In co-supervision with Dipl.-Ing. Nico-Philipp Walz
-
Thanner, M.:
Fehlerschranken für gekoppelte Systeme. Studienarbeit. Universität Stuttgart, Institut für Technische und Numerische Mechanik.
-
Manuel, Wirth:
Simulation von reibungserregten Systemen in Neweul-M2. Studienarbeit. Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2015. In co-supervision with Dipl.-Ing. Andreas Hanselowski.
-
Münzing, C.:
Anwendung des Iterative Rational Krylov Algorithm zur Modellordnungsreduktion elastischer Mehrkörpersysteme, Bachelorthesis. Universität Stuttgart, Institut für Technische und Numerische Mechanik.
In co-supervision with Dipl.-Ing. Michael Fischer.
-
Oloriz, I.:
Investigation of Stress Analysis in Gear Simulations Using Different Model Order
Reduction Techniques. Universität Stuttgart, Institut für
Technische und Numerische Mechanik.
In co-supervision with Dipl.-Ing. Dennis Schurr.
-
Ferner, P.:
Einfluss geometrischer Randbedingungen auf die Modellreduktion elastischer Körper. Universität Stuttgart, Institut für
Technische und Numerische Mechanik.
-
Maier, D.:
Moderne Reduktionsverfahren in der EMKS-Simulation von gekoppelten elastischen Körpern. Universität Stuttgart, Institut für
Technische und Numerische Mechanik / Daimler AG.
In co-supervision with Dipl.-Ing. Michael Fischer.
-
Hildenbrand, M.:
Analyse der Modellierung von flexiblen Körpern in Bezug auf die Bildung von Ein- und Ausgängen und deren anschließender Reduktion,
Studienarbeit. Stuttgart: Universität, Institut für Technische und Numerische Mechanik.
In co-supervision with Dipl.-Ing. Christine Nowakowski.
-
Piao, Y.:
Properties and Behavior of Coupled Elastic Bodies in Applying Alternative Model Reduction,
Masterthesis. Universität Stuttgart, Institut für
Technische und Numerische Mechanik.
-
Dais, J.-N.:
Simulation eines wandernden Kraftangriffspunktes durch die parametrische Modellreduktion mit der Interpolation von Residual-Flexibility Attachment Moden,
Bachelorarbeit. Universität Stuttgart, Institut für
Technische und Numerische Mechanik.
In co-supervision with
Dipl.-Ing. Michael Fischer,
Dipl.-Ing. Markus Burkhardt.
-
Karoui, A.:
Implementierung und Analyse von Dämpfungsmodellen und Ansatzfunktionen gedämpfter elastischer Körper und Einfluss auf die Reduktion und Simulation,
Studienarbeit. Stuttgart: Universität, Institut für Technische und Numerische Mechanik.
In co-supervision with Dipl.-Ing. Christine Nowakowski.
Teaching
Additional Services at the Institute
|
|