|
|
Dr.-Ing. Andreas Hanselowski, M.Sc. (2011 - 2016)
|
|
Email
|
|
Field of Research
Publications
black: published, green: accepted for publication, red: submitted for publication
-
Hanselowski, A.; Ihrle, S.; Hanss, M.:
Fuzzy Bayesian estimation for the identification of fuzzy-parameterized models in the framework of model updating.
In Proceedings of the ISMA-USD 2016, Leuven, Belgium, 2016.
-
Hanselowski, A.; Hanss, M.:
A Model Updating Method based on Inverse Fuzzy Arithmetic.
In Proceedings of GACM 2015, Aachen, Gemany, 2015;
-
Hanselowski, A.; Ihrle, S.; Hanss, M.:
A Fuzzy Model Updating technique motivated by Bayesian Inference.
In Proceedings of UNCECOMP 2015, Crete Island, Greece, 2015;
-
Hanselowski, A.; Hanss, M.:
Uncertainty and Sensitivity Analysis of Different Models of Brake Squeal.
PAMM, Proceedings in Applied Mathematics and Mechanics. Special Issue: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Erlangen, 2014;
-
Hanselowski, A.; Hanss, M.:
Analysis of Epistemic Uncertainty for the Friction-Induced Vibration.
ZAMM, Journal of Applied Mathematics and Mechanics, Special issue ICoVIS 2013, 2015 (12 Pages).
-
Hanselowski, A.:
Untersuchung und Vergleich von Integrationsalgorithmen in Neweul-M2.
Master Thesis, DIPL-MSC-177. University of Stuttgart, Institute of Engineering and Computational Mechanics, 2011.
Talks
-
July 21th, 2015: 6th GACM Colloquium on Computational Mechanics - GACM 2015, Aachen,
"A Model Updating Method based on Inverse Fuzzy Arithmetic"
-
June 16th, 2015: Seminary of the Institute, Monbachtal Bad Liebenzell,
"Grey-Box System Identification using Artificial Neural Networks"
-
June 26th, 2014: Seminary of the Institute, Monbachtal Bad Liebenzell,
"Model Updating in Presence of Uncertainties"
-
March 12th 2014: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics - GAMM 2014, Erlangen,
"Uncertainty and Sensitivity Analysis for Different Models of Brake Squeal"
-
September 30th, 2013: 5th GACM Colloquium on Computational Mechanics - GACM 2013, Hamburg,
"Uncertainty Analysis for Models of Brake-Squeal Phenomena"
-
July 24th, 2013: 3rd International Conference on Vibro-Impact Systems and Systems with Non-Smooth Interactions - ICOVIS 2013, Leinsweiler,
"Fuzzy Arithmetical Uncertainty Analysis for Friction-Induced Vibrations"
-
June 11th, 2013: Seminary of the Institute, Monbachtal Bad Liebenzell,
"Analyse des Bremsenquietschens anhand eines Stab-Scheibe Systems"
-
June 12th, 2012: Seminary of the Institute, Monbachtal Bad Liebenzell,
"Inverse Fuzzy Analysis for Estimation of uncertain Parameters"
Supervised Student- and Diplomathesis
-
Bartosz, Zelek:
Comparison of stochastic and fuzzy methods for the analysis of uncertainty of different origins,
Master Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
Valeria, Carpineti:
Brak squeal analysis for a pad-on-disc system,
Master Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
-
Manuel, Wirth:
Simulation von reibungserregten Systemen in Neweul-M2,
Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
In co-supervision with Dipl.-Ing. Philip Holzwarth.
-
Alaa, Fezai:
Optimierung des Verfahrens zur Simulation von reibungserregten Schwingungen in Neweul-M2,
Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2014.
In co-supervision with Dipl.-Ing. Igor Iroz.
-
Alexander, Heimann:
Model-Updating und Model-Selection an einem Balken,
Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
-
Aulon, Bajrami:
Analyse des Bremsenquietschens an einer Scheibenbremse,
Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
-
Christian, Kleinbach:
Definition von Reibkontakten in Neweulm2 ,
Diplomarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
In co-supervision with Dipl.-Ing. Igor Iroz.
-
Oliver, Stump:
Vertikaldynamik einfacher Fahrzeugmodelle mit nichtlinearen Feder-Dämpferkennlinien,
Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
-
Cinja, Lehmann:
Dynamik von Gehbewegungen auf weichen Schuhsohlen,
Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
-
Benjamin, Fröhlich:
Modalanalyse und Model-Updating für ein Balken-Scheibe-System,
Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2013.
In co-supervision with Dipl.-Ing. Pascal Bestle.
-
Missler, Jonas:
Auswirkungen von Unsicherheiten auf vorgesteuerte Mehrkörpersysteme am Beispiel einer flexiblen Lambda-Kinematik,
Bachelor Thesis, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2012.
In co-supervision with Dipl.-Ing. Markus Burkhardt.
-
Giszas, Sebastian:
Vergleichende Untersuchung des Eigenlenkverhaltens von Fahrzeugmodellen,
Studienarbeit, University of Stuttgart, Institute of Engineering and Computational Mechanics, 2012.
Teaching
Additional Services at the Institute
-
Development of the simulation platform for mechanical Multibody Systems
Neweul-M²
|
|