|
|
Dr.-Ing. Haoyue Hu (2014 - 2018)
|
Forschungsgebiet
Publikationen
veröffentlicht,
zur Veröffentlichung angenommen,
zur Veröffentlichung eingereicht
-
Hu, H.; Eberhard, P.; Fetzer, F.; Berger, P.:
Towards the Simulation of Laser Material Processing Using SPH with Adaptive Particle Refinement.
In Proceedings of the
13th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2018), Galway, Irland, 2018.
-
Fetzer, F.; Berger, P.; Hu, H.; Weber, R.; Graf, T.:
Pores in Laser Beam Welding - Generation Mechanism and Impact on the Melt Flow.
In Proceedings of SPIE, Vol. 10525, S. 105250D-1-7, 2018. [DOI: 10.1117/12.2295798]
-
Fetzer, F.; Hu, H.; Berger, P.; Weber, R.; Eberhard, P.; Graf, T.:
Fundamental Investigations on the Spiking Mechanism by means of Laser Beam Welding of Ice.
Journal of Laser Applications, Bd. 30, Nr. 1, S. 012009-1-9, 2018. [DOI: 10.2351/1.4986641]
-
Hu, H.; Fetzer, F.; Berger, P.; Eberhard, P.:
Process Simulation of Deep Penetration Laser Welding by Coupling a Smoothed Particle Hydrodynamics Model with a Ray-Tracing Scheme.
In Proceedings of the
V International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2017), S. 450-460, Hannover, 2017.
-
Berger, P.; Fetzer, F.; Hu, H.:
Spiking Behaviour and Capillary Instabilities Observed During Welding of Ice.
In Proceedings of the
Lasers in Manufacturing Conference 2017 (LiM 2017), München, 2017.
-
Fetzer, F.; Hu, H.; Weber, R.; Graf, T.:
Experimental and Numerical Investigation of the Capillary Front and Side Walls During Laser Beam Welding.
In Proceedings of the
Lasers in Manufacturing Conference 2017 (LiM 2017), München, 2017.
-
Hu, H.; Eberhard, P.; Fetzer, F.; Berger, P.:
Simulation of Laser Welding with SPH and a Ray-Tracing Scheme.
In Proceedings of the
12th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2017), S. 221-228, Ourense, Spanien, 2017.
-
Hu, H.; Eberhard, P.:
Thermomechanically Coupled Conduction Mode Laser Welding Simulations Using Smoothed Particle Hydrodynamics.
Computational Particle Mechanics, Bd. 4, Nr. 4, S. 473-486, 2017. [DOI: 10.1007/s40571-016-0140-5]
-
Hu, H.; Fetzer, F.; Berger, P.; Eberhard, P.:
Simulation of Laser Welding Using Advanced Particle Methods.
GAMM-Mitteilungen, Bd. 39, Nr. 2, S. 149-169, 2016. [DOI: 10.1002/gamm.201610010]
-
Hu, H.; Eberhard, P.; Fetzer, F.; Berger, P.:
Towards Multiphysics Simulation of Deep Penetration Laser Welding Using Smoothed Particle Hydrodynamics.
In Proceedings of the
VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), S. 8196-8206, Hersonissos, Kreta, Griechenland, 2016.
-
Hu, H.; Eberhard, P.:
Two-Phase Modeling of Conduction Mode Laser Welding Using Smoothed Particle Hydrodynamics.
In Proceedings of the
IV International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2015), S. 308-319, Barcelona, Spanien, 2015.
-
Hu, H.:
Modeling of Abrasive Wear by Coupling the Discrete Element Method and Smoothed Particle Hydrodynamics, Masterarbeit DIPL-MSC-210.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2014.
-
Zander, N.; Bog, T; Elhaddad, M.; Espinoza, R.; Hu, H.; Joly, A.F.; Wu, C.; Zerbe, P.; Düster, A.; Kollmannsberger, S.; Parvizian, J.; Ruess, M.; Schillinger, D.; Rank, E.:
FCMLab: A Finite Cell Research Toolbox for MATLAB.
Advances in Engineering Software, Bd. 74, S. 49-63, 2014. [DOI: 10.1016/j.advengsoft.2014.04.004]
-
Hu, H.:
Strukturoptimierung des Fahrersitzes für das Elektrokleinfahrzeug Visio.M, Studienarbeit.
Technische Universität München, Lehrstuhl für Fahrzeugtechnik, 2013.
-
Hu, H.:
Untersuchungen zum akustischen Verhalten von Getriebegehäusen auf Grundlage der Plattentheorie und der Methode der Finiten Elemente, Bachelorarbeit.
Technische Universität München, Lehrstuhl für Maschinenelemente, 2011.
Vorträge
-
26. Juni 2018: Towards the Simulation of Laser Material Processing Using SPH with Adaptive Particle Refinement.
13th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2018), Galway, Irland.
-
27. September 2017: Process Simulation of Deep Penetration Laser Welding by Coupling a Smoothed Particle Hydrodynamics Model with a Ray-Tracing Scheme.
V International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2017), Hannover.
-
29. Juni 2017: Simulationen von Laserbearbeitungsprozessen mit der SPH Methode.
Arbeitstreffen SimTech Industrial Consortium, Working Committee „Manufacturing“, Universität Stuttgart.
-
13. Oktober 2016: Modeling of Laser Welding with SPH.
CECAM Workshop „Particle-based Simulations for Hard and Soft Matter“, Universität Stuttgart.
-
07. Oktober 2016: Simulationen von Laserbearbeitungsprozessen mit der SPH Methode.
Dynamiktag am Institut für Technische und Numerische Mechanik (ITM), Universität Stuttgart.
-
06. Juni 2016:
Towards Multiphysics Simulation of Deep Penetration Laser Welding Using Smoothed Particle Hydrodynamics.
VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Hersonissos, Kreta, Griechenland.
-
30. September 2015: Two-Phase Modeling of Conduction Mode Laser Welding Using Smoothed Particle Hydrodynamics.
IV International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2015), Barcelona, Spanien.
-
09. September 2015: DFG Projekt: „Modellierung der Kapillarfront beim Lasertiefschweißen mit der Smoothed Particle Hydrodynamics Methode“ - Projektübersicht und Fortschritt.
Wissenschaftliche Diskussionsrunde am Institut für Strahlwerkzeuge (IFSW), Universität Stuttgart.
Betreute Bachelor-, Studien- und Masterarbeiten
-
Erweiterung und Validierung des SPH-Modells in Pasimodo für mehrphasige und Mehr-Komponenten-Strömungen, Studienarbeit, STUD-434.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2015.
-
Wärmeübertragung durch Konvektion und Strahlung mit der Smoothed Particle Hydrodynamics Methode, Forschungsmodul (Simtech), STUD-440.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2016.
-
Simulationen mit Fluid-Struktur-Interaktion und dynamischen Grenzflächen mit der Smoothed Particle Hydrodynamics Methode, Masterarbeit, MSC-237.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2016.
-
Comparison of Weakly Compressible and Truly Incompressible Formulations of SPH Method with Classical Mesh-Based Methods, Masterarbeit.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2017 (laufend).
Betreuung gemeinsam mit Chandramouli Gnanasambandham, M.Sc.
-
Beschreibung von Wärmeausbreitungsvorgängen in Scheibenbremssystemen mit elastischen Körpern, Masterarbeit, MSC-265.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2018.
Betreuung gemeinsam mit Dr.-Ing. Pascal Ziegler.
-
Modellierung und Simulation von Laserschneidprozessen mit der SPH-Methode in Pasimodo, Bachelorarbeit, BSC-88.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2018.
-
Influence of Temperature-Dependent Material Parameters for Laser Welding Simulations in Pasimodo, Masterarbeit, MSC-277.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2018.
Lehre
Sonstige Institutsaufgaben
-
Systemadministration
-
Literaturdatenbank
|
|