Institute of Engineering and Computational Mechanics | Universität Stuttgart

Bild vom Institut

University of Stuttgart

|

|

|

|

|

|

	Institute of Engineering and Computational Mechanics
	Staff

Haoyue Hu, Dr.-Ing. (2014 - 2018)

Field of Research

Smoothed Particle Hydrodynamics

Publications

published, accepted for publication, submitted for publication

Hu, H.; Eberhard, P.; Fetzer, F.; Berger, P.: Towards the Simulation of Laser Material Processing Using SPH with Adaptive Particle Refinement.
In Proceedings of the 13th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2018), Galway, Ireland, 2018.

Fetzer, F.; Berger, P.; Hu, H.; Weber, R.; Graf, T.: Pores in Laser Beam Welding - Generation Mechanism and Impact on the Melt Flow.
In Proceedings of SPIE, Vol. 10525, pp. 105250D-1-7, 2018. [DOI: 10.1117/12.2295798]

Fetzer, F.; Hu, H.; Berger, P.; Weber, R.; Eberhard, P.; Graf, T.: Fundamental Investigations on the Spiking Mechanism by means of Laser Beam Welding of Ice.
Journal of Laser Applications, Vol. 30, No. 1, pp. 012009-1-9, 2018. [DOI: 10.2351/1.4986641]

Hu, H.; Fetzer, F.; Berger, P.; Eberhard, P.: Process Simulation of Deep Penetration Laser Welding by Coupling a Smoothed Particle Hydrodynamics Model with a Ray-Tracing Scheme.
In Proceedings of the V International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2017), pp. 450-460, Hannover, 2017.

Berger, P.; Fetzer, F.; Hu, H.: Spiking Behaviour and Capillary Instabilities Observed During Welding of Ice.
In Proceedings of the Lasers in Manufacturing Conference 2017 (LiM 2017), Munich, 2017.

Fetzer, F.; Hu, H.; Weber, R.; Graf, T.: Experimental and Numerical Investigation of the Capillary Front and Side Walls During Laser Beam Welding.
In Proceedings of the Lasers in Manufacturing Conference 2017 (LiM 2017), Munich, 2017.

Hu, H.; Eberhard, P.; Fetzer, F.; Berger, P.: Simulation of Laser Welding with SPH and a Ray-Tracing Scheme.
In Proceedings of the 12th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2017), pp. 221-228, Ourense, Spain, 2017.

Hu, H.; Eberhard, P.: Thermomechanically Coupled Conduction Mode Laser Welding Simulations Using Smoothed Particle Hydrodynamics.
Computational Particle Mechanics, Vol. 4, No. 4, pp. 473-486, 2017. [DOI: 10.1007/s40571-016-0140-5]

Hu, H.; Fetzer, F.; Berger, P.; Eberhard, P.: Simulation of Laser Welding Using Advanced Particle Methods.
GAMM-Mitteilungen, Vol. 39, No. 2, pp. 149-169, 2016. [DOI: 10.1002/gamm.201610010]

Hu, H.; Eberhard, P.; Fetzer, F.; Berger, P.: Towards Multiphysics Simulation of Deep Penetration Laser Welding Using Smoothed Particle Hydrodynamics.
In Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), pp. 8196-8206, Hersonissos, Crete, Greece, 2016.

Hu, H.; Eberhard, P.: Two-Phase Modeling of Conduction Mode Laser Welding Using Smoothed Particle Hydrodynamics.
In Proceedings of the IV International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2015), pp. 308-319, Barcelona, Spain, 2015.

Hu, H.: Modeling of Abrasive Wear by Coupling the Discrete Element Method and Smoothed Particle Hydrodynamics, master's thesis DIPL-MSC-210.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2014.

Zander, N.; Bog, T; Elhaddad, M.; Espinoza, R.; Hu, H.; Joly, A.F.; Wu, C.; Zerbe, P.; Düster, A.; Kollmannsberger, S.; Parvizian, J.; Ruess, M.; Schillinger, D.; Rank, E.:
FCMLab: A Finite Cell Research Toolbox for MATLAB. Advances in Engineering Software, Vol. 74, pp. 49-63, 2014. [DOI: 10.1016/j.advengsoft.2014.04.004]

Hu, H.: Strukturoptimierung des Fahrersitzes für das Elektrokleinfahrzeug Visio.M, student research project.
Technische Universität München, Lehrstuhl für Fahrzeugtechnik, 2013.

Hu, H.: Untersuchungen zum akustischen Verhalten von Getriebegehäusen auf Grundlage der Plattentheorie und der Methode der Finiten Elemente, bachelor's thesis.
Technische Universität München, Lehrstuhl für Maschinenelemente, 2011.

Talks

June 26, 2018: Towards the Simulation of Laser Material Processing Using SPH with Adaptive Particle Refinement.
13th International Smoothed Particle Hydrodynamics European Research Interest Community Workshop (SPHERIC 2018), Galway, Ireland.

September 27, 2017: Process Simulation of Deep Penetration Laser Welding by Coupling a Smoothed Particle Hydrodynamics Model with a Ray-Tracing Scheme.
V International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2017), Hannover.

June 29, 2017: Simulationen von Laserbearbeitungsprozessen mit der SPH Methode.
Workshop of SimTech Industrial Consortium, Working Committee „Manufacturing“, Universität Stuttgart.

October 13, 2016: Modeling of Laser Welding with SPH.
CECAM Workshop “Particle-based Simulations for Hard and Soft Matter“, Universität Stuttgart.

October 7, 2016: Simulationen von Laserbearbeitungsprozessen mit der SPH Methode.
Dynamiktag at Institut für Technische und Numerische Mechanik (ITM), Universität Stuttgart.

June 6, 2016: Towards Multiphysics Simulation of Deep Penetration Laser Welding Using Smoothed Particle Hydrodynamics.
VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Hersonissos, Crete, Greece.

September 30, 2015: Two-Phase Modeling of Conduction Mode Laser Welding Using Smoothed Particle Hydrodynamics.
IV International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2015), Barcelona, Spain.

September 9, 2015: DFG Projekt: „Modellierung der Kapillarfront beim Lasertiefschweißen mit der Smoothed Particle Hydrodynamics Methode“ - Projektübersicht und Fortschritt.
Scientific discussion at Institut für Strahlwerkzeuge (IFSW), Universität Stuttgart.

Supervised Student Theses

Erweiterung und Validierung des SPH-Modells in Pasimodo für mehrphasige und Mehr-Komponenten-Strömungen, student research project, STUD-434.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2015.

Wärmeübertragung durch Konvektion und Strahlung mit der Smoothed Particle Hydrodynamics Methode, research project (Simtech), STUD-440.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2016.

Simulationen mit Fluid-Struktur-Interaktion und dynamischen Grenzflächen mit der Smoothed Particle Hydrodynamics Methode, Master thesis, MSC-237.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2016.

Comparison of Weakly Compressible and Truly Incompressible Formulations of SPH Method with Classical Mesh-Based Methods, Master thesis.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2017 (in progress).
Supervision in cooperation with Chandramouli Gnanasambandham, M.Sc.

Beschreibung von Wärmeausbreitungsvorgängen in Scheibenbremssystemen mit elastischen Körpern, Master thesis, MSC-265.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2018.
Supervision in cooperation with Dr.-Ing. Pascal Ziegler.

Modellierung und Simulation von Laserschneidprozessen mit der SPH-Methode in Pasimodo, Bachelor thesis, BSC-88.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2018.

Influence of Temperature-Dependent Material Properties for Laser Welding Simulations in Pasimodo, Master thesis, MSC-277.
Universität Stuttgart, Institut für Technische und Numerische Mechanik, 2018.

Teaching

Exercise classes in Applied Mechanics I (WS 2014/15)

Exercise classes in Applied Mechanics II (SS 2015)

Additional Services at the Institute

System administration

Literature database